Gema OptiCenter OC09 - Suction Unit; Level Sensors Kit** (Optihopper)

Rev. 00 02/21
OptiCenter OC09 Product description

21
Suction unit
The suction unit provides the following features:
– Dust-free removal of coating powder from the OptiHopper
– Dust-free cleaning of the OptiCenter housing and components with
additional brush head
– Can be enabled or disabled at any time on the TouchPanel
– The extracted powder is transported to the after filter (the suction
power is increased by additional AirMover)
fig.
8
Level sensors kit** (OptiHopper)
The kit provides the following features:
– Two level sensors for monitoring the levels ("full" and "low")
– The sensors are cleaned with compressed air pulses
fig.
9