Gema OptiMove CR07 - Hardware Pin Allocations; Plug 2.1 Power IN; Plug 2.2 Drive Supply; Plug 2.3 Drive I;O

V 12/13
OptiMove CR07 Hardware • 53
Hardware
Pin allocations
Plug 2.1 - Power IN
Pin Function
1 Neutral conductor
2 Phase (230 VAC)
3 Axis start (230 VAC)
PE Ground
Plug 2.2 - Drive supply
Pin Function
1 Neutral conductor
2 Phase
3 Not connected
PE Ground
Plug 2.3 - Drive I/O
Pin Function
1 GND frequency converter
2 24 V frequency converter
3 Frequency converter error
4 RPM preset value
5 Motor right running (UP)
6 Motor left running (DOWN)
7 Reserve
8 Reserve
9 24 VDC OptiMove
10 Motor brake
11 Proximity switch
12 Reserve
13 B+
14 B-