V 12/13
OptiMove CR07 Spare parts list • 57
Spare parts list
Ordering spare parts
When ordering spare parts for powder coating equipment, please indicate
the following specifications:
- Type and serial number of your powder coating
equipment
- Order number, quantity and description of each spare
part
Example:
- Type OptiMove CR07
Serial number 1234 5678
- Order no. 203 386, 1 piece, Clamp - Ø 18/15 mm
When ordering cable or hose material, the required length must also be
given. The spare part numbers of this bulk stock is always marked with
an *.
Wearing parts are always marked with a #.
All dimensions of plastic hoses are specified with the external and
internal diameter:
Example:
Ø 8/6 mm, 8 mm outside diameter (o/d) / 6 mm inside diameter (i/d)
WARNING!
Only original Gema spare parts should be used, because the
explosion protection will also be preserved that way! The use of
spare parts from other manufacturers will invalidate the Gema
guarantee conditions!
To Next Page
Loading...
