EFN EFB_Rev.01 01-2014 pag. 50
The following keys are present on the controller
When the appliance is OFF (0), press just once to pass to ON
(1).
When the unit is on and after having activated the keypad by
pressing and holding any key for 3 sec, press just once to
switch OFF.
Used to increase or decrease the value that appears on the
display. With the keypad active, press and hold the UP arrow
key for 3 sec to activate the continuous timed cycle.
With the appliance ON, press and hold for 3 sec to activate
defrost.
With the appliance ON and keypad active, press just once to
display the set point; press and hold for 3 sec to change the set
point.
With the appliance ON and keypad active, press just once to
switch the interior light on or off.
With the appliance ON, press and hold for 3 sec to
activate “night” function of Energy saving.
The following icons are present on the controller display:
Only lit when the appliance is OFF, otherwise always off.
May be lit to show the temperature unit of measurement.
Lit during normal refrigerating stages with compressor ON; off
with compressor OFF. Blinking during defrosting (temperature
drop).
Only lit when the cabinet interior lights are on.
Only lit when the cabinet internal fans are operating
(evaporator).
Only lit when the continuous cycle is activated (timed cycle).
Only lit when an appliance malfunction or alarm is recorded by
the controller.