Instruction Manual
The Five Basic Steps:
· Step 1 – Unpack the Sparkle Spa Pro, basket and bracelet /
watch holder from its box and plastic wrapping.
· Step 2 – Connect to electrical power source. DO NOT turn
the ultrasonic on unless you have first filled up the tank
with water and / or for best results a water plus ultrasonic
cleaning solution mixture. GemOro® Sparkle Pak ultrasonic
cleaning solution concentrate packets (sold separately Item
#0935) is recommended.
· Step 3 – To open the Sparkle Spa Pro transparent cover,
press the crescent shaped black button that is located above
the LED digital display to automatically expose the tank
and add the appropriate amount of water and /or mixture
of water and Sparkle Pak to the tank. Fill the solution level
to within approximately 1 inch from the top of the stainless
steel tank’s rim or to the MAX fill line as clearly marked on
the rear center portion of the tank wall. DO NOT allow the
water to evaporate below this level or fill the tank above this
level as damage may occur and the warranty will become
void. Depending on the item being cleaned, while we believe
our GemOro Sparkle Pak cleaning solution with special
brighteners and cleaning agents is the best ultrasonic jewelry
cleaning solution for cleaning your jewelry, water may also be
mixed with alternative appropriate cleaning solutions (certain
liquid household soaps, etc.) to also achieve better results. A
small amount of dishwashing soap with a degreasing agent
mixed with water will do the job. DO NOT use flammable
To Next Page
Loading...
