Gen7Pets G7 Jogger Instructions

G7 Jogger
™
Pet Stroller Instructions
Patterns vary
2
Parts List
How to assemble your new stroller
Stroller Frame
Front Wheel
Front Wheel Assembly
Rear Wheels and Axle
Parent Tray
Step 1 Step 2
1. Attach front wheel to front wheel assembly. Be
sure to insert silver colored tooth on the wheel
into the open groove on the front wheel fork.
2. Twist long silver colored lever and tighten by
pulling lever up to lock wheel onto the fork.
1. Attach the front wheel onto the front wheel forks
2. Insure that the Valco buttons on the fork are in
correct position with the wheel
3. Push the front wheel onto the front forks until
Valco buttons snap into place
Assemble wheel onto the front fork Assemble front wheel assembly to the frame

Gen7Pets G7 Jogger Specifications

General

Type	Pet Stroller
Brand	Gen7Pets
Model	G7 Jogger
Weight capacity	75 lbs
Foldable	Yes
Number of wheels	3
Adjustable Length	No
Hands-Free Design	No
Reflective Stripes	Yes
Product Type	Pet stroller
Color Options	Blue, Red
Intended Use	Walking, jogging
Material	Nylon