Gendex Expert DC - JP1 Jumper Settings

Installation Steps
26
Document No. PEXPERTIM - Rev. 1 - Release Date: May 2007
Install the Horizontal Arm
Horizontal Arm
1. Open the shipping carton and locate the Horizontal Arm in the top
portion of the carton.
Figure 15 Locate the Horizontal Arm
Remove
bag and
set aside
for later
use.
Read and remove
warning tag.
2. Read and remove the warning tag. Remove the plastic bag containing
the set screw. Set aside for insertion on page 31, step 5.
Figure 16 Remove the Warning Tag and Plastic Bag
(Continued)