Gendex Expert DC - Install Articulated Arm & Tubehead Assembly

Installation Steps
29
Document No. PEXPERTIM - Rev. 1 - Release Date: May 2007
Install Articulated Arm & Tubehead Assembly
Articulated Arm and
Tubehead Assembly
1. Remove the top packing material of the shipping carton to gain access to
the Articulated Arm and Tubehead Assembly. Remove assembly from
the shipping carton.
Figure 21 Locate the Articulated Arm and Tubehead
Assembly
IMPORTANT! Read and remove the red warning tag, but do not remove the strapping
holding the Articulated Arm closed or the plastic tube enclosing the cable
wires.
2. The Tubehead and Articulated Arm are installed as a single unit.
Balance the Articulated Arm on your shoulder and position the arm
above the Horizontal Arm.
(Continued)