11-9
G990710 30 June 2008
Networking Support Setup
Try to restore the network. If the network can be restored, operations
can continue. If the network cannot be quickly restored and scanning
must continue, new scans will be safely stored locally, but will not
be transferred to the server until the connection is restored.
Therefore, new scans will not appear on the Study list, which will
remain blank. To see these new scans in the list, exit and follow the
fallback operations for VisionQ.
Limitations of Networking Support
Known limitations of networking support are:
• There is a network transfer delay between acquisition or
reconstruction, and the appearance of the study on the Study
List. Although they may not appear on the list immediately,
the images are available for review and workup on the
scanner immediately.
• There is no study locking mechanism to prevent two users
from simultaneously editing or updating the same study.
Clinic workflow must ensure this does not happen.
However, if it does occur, only workups, and not patient
scan data, are at risk of being lost.
• Unsaved workups, reports, or jpegs may be lost as a result
of a network failure that happens during the save operation.
To Next Page
Loading...
