13-3
Product Information
G990710 30 June 2008
Weight
Total Weight: 510 lbs. (231.3 kg)
Tube Head Pod: 35.5 lbs. (16.1 kg)
Receptor Pod: 57 lbs. (25.9 kg)
X-Ray Power Supply: 9 lbs. (4.1 kg)
Power Cords required outside of the United States
Power Cords are not supplied with systems used outside of the United
States. Three Power Cords must be obtained, one each for the Scanner,
Computer, and Monitor. The use of medical grade line cords is
recommended.
Splicing terminating connectors onto the power cord is not
recommended and may result in a hazardous condition.
Power Cord Specifications:
10 Amp, 220-240VAC, 50 Hz / 60 Hz, 16/3 Gauge (minimum) Length
6 to 12 ft. (2m to 4m), IEC-320-C13 connector end. Both the plug and
connector ends must be molded with power cord.
Circuit Breaker
Assembly
U0 U1 I1 Apparent
Ressistance
100VAC 101.9VAC 98.1VAC 7.03A 0.54ohms
115VAC 115.1VAC 111.2VAC 6.10A 0.64ohms
200VAC 200.5VAC 191.1VAC 3.69A 2.55ohms
230VAC 230.9VAC 218.7VAC 3.18A 3.84ohms
Where:
U0 is the no-load Mains Voltage
U1 is the Mains Voltage under load.
I1 is the Mains Current under load.
U0 - U1
R =
I1
To Next Page
Loading...
