13-9
Product Information
G990710 30 June 2008
Preventive Maintenance Schedule - for Owner / User
Daily: Routine Dusting - all surfaces
Monthly: Clean all surfaces and check for failed/faulty indicator
lights.
Yea rly : Check for satisfactory image quality.
IT IS THE RESPONSIBILITY OF THE USER TO INSURE THAT
THE EQUIPMENT IS MAINTAINED IN COMPLIANCE WITH
THE MANUFACTURER'S RECOMMENDED MAINTENANCE
SCHEDULE. THE MANUFACTURER AND THE ASSEMBLER
/ INSTALLER ARE RELIEVED FROM RESPONSIBILITY IN
THOSE CASES WHERE NON-COMPLIANCE WITH THE
STANDARD RESULTS FROM THE USER'S FAILURE TO
HAVE THE MANUFACTURER'S RECOMMENDED
MAINTENANCE PERFORMED.
The actual maintenance inspection and consequent service must be
accomplished either by an authorized dealer or by a competent
serviceman of the user's choice who has adequate training in those
aspects of the Performance Standards of the Radiation Control for
Health and Safety Act of 1968 that are applicable to this equipment.
Neither the inspection nor service is part of the equipment warranty.
(To be arranged for by the Owner or User with the Dealer's Service
Department).
Planned Maintenance - 12 Month Schedule
The Planned Maintenance philosophy for this system is based upon
the assumption that a periodic inspection of the equipment, along
with periodic cleaning and calibration, will maintain image quality.
The system requires normal periodic inspection and maintenance.
Scheduled periodic inspections are necessary to detect problems
which can result from excessive wear, loose items, chafing wires,
and mis-adjusted parts from continual system use.
In addition to mechanical inspection and calibration, a series of
image performance tests are to be conducted. These tests verify that
the system meets or exceeds operational specifications and that it
will provide continued excellent image quality.
Planned maintenance is to be performed annually by a factory
trained Service Representative.
To Next Page
Loading...
