4-1
G990710 30 June 2008
Chapter
4
System Startup and
Shutdown
It is recommended to do a System Shutdown each day at the close of
business. The system is available for use immediately after System
Startup, no device warmup is required.
System Startup
The System includes the Scanner and a Computer Workstation. Both
units must be ON to function properly. To start the system, do the
following:
1. Power up the Scanner: press the ON button on the
Main Control Box. The POWER indicator on the
Main Control Box and Scanner light.
2. Power up Computer Workstation: press the
power button on the front of the Workstation. The
computer boots and loads the operating system.
3. Launch Vision Software: double-click the Vision
icon on Workstation desktop. The Vision software
application is launched.
NOTE: Although the system is now ready to scan, the
Ready indicator does not illuminate until the Acquire
button is pressed to start a scan.
System Shutdown
The Scanner and Computer Workstation are powered independently.
Both units are powered OFF as described below.
To shut down the system:
1. From the Main menu on the Computer Workstation, select
File > Exit. Vision closes but the Windows desktop remains ON.
To Next Page
Loading...
