EasyManua.ls Logo

General Equipment RIP-R-STRIPPER FCS16 User Manual

Default Icon
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR MANUAL
Includes Safety, Service and Replacement Part Information
Model FCS16
RIP-R-STRIPPER
®
Floor Covering Stripper
Form: GOM4240301
Version 3.2
Do not discard this manual. Before operation, read and
comprehend its contents. Keep it readily available for reference
during operation or when performing any service related func-
tion. When ordering replacement parts, please supply the
following information: model number, serial number and part
number. For customer service assistance, telephone
800.533.0524, +507.451.5510. Our Customer Service Department
telefax number is 877.344.4375 (DIGGER 5), +507.451.5511.
There is no charge for customer service activities .
Internet address: http://www.generalequip.com.
E-Mail location: general@generalequip.com.
Copyright 2006, General Equipment Company.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the General Equipment RIP-R-STRIPPER FCS16 and is the answer not in the manual?

General Equipment RIP-R-STRIPPER FCS16 Specifications

General IconGeneral
ModelFCS16
TypeFloor Stripper
CategoryFloor Machine
Power SourceElectric
Motor Power1.5 HP
Working Width16 inches
Voltage115 V
Amperage15 A
Weight145 lbs

Summary

Safety Precautions

PREPARATION.

Essential steps before commencing operation, including reading the manual and proper instruction.

Assembly

INSTALLATION OF THE ADJUSTABLE SECTION OF THE OPERATOR HANDLE.

Before Starting the Motor

BLADE CONFIGURATIONS, ACCESSORY ATTACHMENTS AND APPLICATIONS.

Details on various blade types, their uses, and specific attachments for different floor covering materials.

INSTALLING A BLADE OR THE CERAMIC TILE RIPPER ATTACHMENT TO THE RIP-R-STRIPPER.

Operation

STARTING THE RIP-R-STRIPPER ON THE JOB SITE.

Procedures for safely powering on and starting the machine at the work location.

OPERATING THE RIP-R-STRIPPER ON THE JOB SITE.

Detailed guidance on how to use the machine effectively and safely during material removal.

OPERATIONAL PARAMETERS AND TECHNIQUES FOR THE RIP-R-STRIPPER.

Factors affecting material removal rates and techniques for optimizing performance.

STOPPING THE RIP-R-STRIPPER ON THE JOB SITE.

Service

PREVENTATIVE MAINTENANCE CHECK LIST.

A list of recommended checks and tasks to keep the machine in optimal working condition.

LUBRICATION REQUIREMENTS.

Troubleshooting

ELECTRIC MOTOR.

Common issues with the electric motor, such as failure to start or loss of power.

OPERATIONAL PROBLEMS.

Diagnosis and solutions for issues like uneven blade wear or excessive machine jumping.