To Next PageTo Next Page
Need help?Do you have a question about the General Instrument STARLINE MB-750D-H and is the answer not in the manual?
General| Brand | General Instrument |
|---|---|
| Model | STARLINE MB-750D-H |
| Category | Amplifier |
| Language | English |
Provides instructions for installing, configuring, and operating the MB-750D-H and MB-750D-H/40 mini-bridgers.
States that the installation manual is complete and no additional documentation is required.
Provides contact information for assistance and details the procedure for sending equipment for repair.
Describes the MB-750D-H and MB-750D-H/40 as dual output, high gain, three-stage hybrid amplifiers.
Describes the major components and subassemblies associated with the MB-750D-H and MB-750D-H/40.
Explains the function, specifications, and protection features of the MPPS power pack.
Details the electronics of the forward amplifier, including stages and equalization.
Details the selection and installation of components required to configure the amplifier.
Explains how to select and install forward cable equalizers to compensate for cable attenuation.
Describes how to select and install output splitters or directional couplers.
Shows typical test equipment connections for preinstallation testing.
Describes methods for suspending or mounting the unit on strand or pedestal.
Instructions for applying power, checking voltages, and balancing amplifier output.
Details final adjustments for manual thermal gain control and gain reserves.
Provides steps to test and adjust the operation of the Automatic Level Control (ACB) option.
Lists key operational and performance parameters for the MB-750D-H amplifier.
Lists specifications for the Automatic Control Board (MB-ACB/*) option.
Lists specifications for the Return Amplifier Kit (RA-Kit/40L) for two-way service.
Lists specifications for the DF1-SS/40 and DF1-SS diplex filters.
