SETUP & OPERATION MANUAL
“MAXI-LATHE VS+”
12
″X 17″WOOD LATHE
variable speed
FEATURES
Quick lock control levers easily position
tool rest.
Large 12″inboard bowl turning capacity.
Stable cast-iron frame, head & tailstock to
reduce chatter and vibration for smoother
turning.
Maximum distance of 17 5⁄16″between
centers.
Maximum distance of 49″between cen-
ters with optional bed extension (Item #25-
205).
Quick release belt tension lever for faster,
easier speed changes.
Three variable speed ranges: 300 to 900,
600 to 1800 & 1200 to 3600 rpm.
Digital spindle speed display.
12″tool rest with sturdy 1″diameter sup-
port post.
Forward/reverse switch.
Features positive spindle indexing in 10°
increments - total 36 index positions.
SPECIFICATIONS
SPINDLE SPEED
(VARIABLE) 300 TO 3600 RPM
SWING OVER BED
12″(304 MM)
SWING OVER TOOL REST
9 ¼″(236 MM)
SWING OVER SIDE BED
19 ¼″(490 MM)
SWING OVER SIDE TOOL REST
16 ⅝″(424 MM)
DISTANCE BETWEEN CENTERS
17 5⁄16″(440 MM)
SPINDLE THREAD
1″(25.4 MM) - 8 TPI
TAILSTOCK THROUGH HOLE
⅜″(10 MM)
MORSE TAPER
MT #2
SELF EJECTING TRAVEL
2 ⅛″(55 MM)
TOOL REST
12″(305 MM)
FACE PLATE
3 ⅛″(80 MM)
INDEXING POSITION
36 X 10°
MOTOR M1
¾ HP, 110 V, 8 A, 2500 RPM
WEIGHT
146 LBS (66.5 KG)
MODEL
#25-200
VERSION 2_REVISION 1 - November 04/13 (S/N:25855611)
© Copyright General® International 11/2013
To Next Page
Need help?
General
