THANK YOU
for choosing this General® MFG General “T” fence system. This
fence system has been carefully tested and inspected before shipment and if properly used
and maintained, will provide you with years of reliable service. For your safety, as well as to
ensure optimum performance and trouble-free operation, and to get the most from your
investment, please take the time to read this manual before assembling, installing and using
your General “T” fence system.
The manual’s purpose is to familiarize you with the safe operation, basic function, and features
of General “T” fence system as well as the set-up, maintenance and identification of its parts
and components. This manual is not intended as a substitute for formal woodworking instruc-
tion, nor to offer the user instruction in the craft of woodworking. If you are not sure about the
safety of performing a certain operation or procedure, do not proceed until you can confirm,
from knowledgeable and qualified sources, that it is safe to do so.
Once you’ve read through these instructions, keep this manual handy for future reference.
Disclaimer:
The information and specifications in this
manual pertain to the unit as it was supplied from the
factory at the time of printing. Because we are commit-
ted to making constant improvements, General
®
MFG
reserves the right to make changes to components,
parts or features of this unit as deemed necessary, with-
out prior notice and without obligation to install any
such changes on previously delivered units. Reasonable
care is taken at the factory to ensure that the specifica-
tions and information in this manual corresponds with
that of the unit with which it was supplied. However, spe-
cial orders and “after factory” modifications may render
some or all information in this manual inapplicable to
your fence system. Further, as several generations of this
model of fence system and several versions of this man-
ual may be in circulation, if you own an earlier or later
version of this unit, this manual may not depict your
fence system exactly. If you have any doubts or ques-
tions contact your retailer or our support line with the
model and serial number of your unit for clarification.
GENERAL® MFG (CO) LTD.
835, Cherrier Street, Drummondville (Quebec) Canada J2B 5A8
Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.ca