Genesis 725 User Manual

List of tools needed for installation and setup procedures.

Procedure to check if the garage door is properly balanced before opener installation.

Instructions for securing the header bracket to a wall stud.

Instructions for securing the header bracket to a ceiling support.

Methods for attaching the door bracket to steel or reinforced doors.

Methods for attaching the door bracket to wooden garage doors.

Explanation of the safety system's function and purpose.

Procedures for mounting the photo eye sensors on the garage door track.

Instructions for wiring the photo eye sensors to the opener unit.

Guide on operating the wall control buttons after installation.

Standard method for connecting the opener to a grounded electrical outlet.

Procedures for hardwiring the opener if local codes require it.

Step-by-step guide for aligning the emitter and sensor photo eyes.

Explanation of how travel limits regulate door position.

Procedure to set the fully open position for the garage door.

Procedure to set the fully closed position for the garage door.

Procedure to test the door's automatic reversal mechanism.

Procedure to test the photo eye safety system's obstruction detection.

Steps to add new remote controls to the opener system.

Procedure to erase all stored remote controls from the opener's memory.

Instructions for changing the battery in the remote control unit.

Overview of how to use the push button, remote, and keypad.

Steps to disengage the opener from the door for manual movement.

Steps to re-engage the opener with the garage door.

List of parts included for initial installation of the opener.

List of optional accessories available for the opener system.

General warranty terms for garage door opener units.

Specific details on what the manufacturer covers under warranty.

List of conditions and parts not covered by the warranty.

Items explicitly excluded from the warranty coverage.

Conditions that will nullify the product's warranty.