Genesis GRAVITON - Free History; How to set time & date

15
15
5.6 Free History
Fig#12
Free Diving History Record. From Scuba History press the Down Button once.
1. Total Dives: Accumulative record of all free dives
2. Max Time: The longest time from all free diving dives in records
3. Max Depth: Maximum depth from all free diving dives in records (Will reflect the Units the watch is set on)
5.7 How to set time & date:
From the Initial Time screen press the Mode Selector button to go to the Main Menu, press the Down Button to go to
Settings, press Mode Selector again > Set System press Mode Selector again & using the Up or Down buttons locate
GNSS and turn it ON. Now go to Time & Press Mode Selector. On UTC, using Up/Down buttons enter the UTC of your
location (Example: San Diego, CA, USA is -7.0 hours UTC; NY City, New York, USA is -5.0 Hours UTC). Press Mode Selector
to accept UTC value. Now with the Up or Down buttons access > Set Time when you press the Mode Selector one last
time the Graviton will show you a screen that indicates that the computer is locating GNSS (Satellites) & a percentage.
Make sure you perform this operation outside so the watch has a direct line of sight to the sky so the antenna is able to
access satellites & wait for screen to complete search to 100%. The time & date will be adjusted automatically via
satellite link.
o Time Access the 5 different Time submenus:
 UTC Unified Time Coordinated | + or - Hours UTC for a specific location in the world.
 Format Changes the Date Format: YY.MM.DD | DD.MM.YY | MM.DD.Y
 DTS Day Time Savings ON or OFF
 Set Time Sets the Time of Day using GNSS
 24H/12H Changes the Hour Format from 12h to 24h versions
 Alarm Clock
• Sets different Alarm Clock options
o Press UP/DOWN to select OFF. One Time, Workday. Daily
o Press Mode Selector to go to time values & UP/DOWN to increase or decrease values.
Free History
Longest Time
Max Depth
Total Dives
34
1:07
7