Once this screen is accessed one of the sampling options will be
blinking. Press the Up or Down buttons to select other sampling
options as needed. Press the Mode Selector button to accept your
selection. The value will stop blinking.
Note: Sampling means how often the computer will be collecting
(or ‘sampling’) depth/time events and record them within a data
base within the memory. A longer sampling rate time will provide
less accuracy but will also use less memory while a shorter sampling
rate will produce a more detailed graph but more memory will be
used. The Graviton will hold around 500 logs at a 10s sampling rate.
Stops the log at a specified time after surfacing. Useful feature
when no other repetitive dive is going to be performed
To Next Page
Loading...