7-190
Driver assistance system
Smart Parking, Remote Parking
Operating order
Parking function operates in the
following order:
1.
Getting ready for parking
2.
Searching for parking space
3.
Select parking type and operating
mode
4. Smart Parking
5.
Remote Parking
•
Parking function includes Parking and
Remote Smart Parking.
OJWEV071102 OJWEV071102
(1) With the vehicle turned on, depress
the brake pedal and shift the gear to
D (Drive) or N (Neutral).
(2)
Press and hold the Parking/View
(
) button to turn on Remote
Smart Parking Assist.
• 'Agree' must be selected on the
infotainment system screen and the
infotainment system has to operate
properly to use Parking function.
•
If you drive above 5 km/h (3 mph)
with the vehicle on, you may use
the Parking function with the gear
shifted to N (Neutral).
OJWEV071278LOJWEV071278L
(1) Slowly drive forward maintaining the
distance of approximately 100 cm (40
in.) from the parked vehicles.
(2)
When searching for a parking space
is complete, a message will appear
on the infotainment system screen
with an audible sound to notify the
search is complete.
(3)
‘Select Parking Type’ will be displayed
on the infotainment system screen
and the selected parking space
will appear on Top View screen of
Surround View Monitor.
•
Remote Smart Parking Assist
searches for parking spaces that are
next to parked vehicles, or parking
spaces with parked vehicles in front
or rear.
•
While searching for a parking space,
when vehicle speed is above 20
km/h (12 mph), a message will
appear on the infotainment system
screen informing you to slow down.
When vehicle speed is above 30
km/h (18 mph), Parking function will
turn off.
To Next Page
Loading...
