EasyManua.ls Logo

Genevo One M - Additional Device Controls; Middle Button Functions; Right Button Functions

Default Icon
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Radar Detector GENEVO ONE M 02
2) Middle button BRIGHTNESS / ALERT SUPPRESSION
Short press: You can change the brightness of the display - Bright Dim Smart Dark Full Dark.
Long Press: If you hold it during an alert you will mark the place of false radar reporting so at a given point detector
during the next passage will be suppressed. If you suppress a false alert, detector will not detect radars in radius of about
150 meters. Hold button during the „suppressed“ radar alert and this listing will be canceled. After next passage radar alert
will be signaled acoustically.
3) Right button SENSITIVITY / ADD YOUR OWN GPS POINT
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the sensitivity
of K / Ka bands can be reduced according to user preference.
Long Press: Add / Remove your own GPS point.
4) Buttons on the right side + / -
Short press: Changing volume of the detector.
Menu:
Press Left button for enter into menu.
Press Left button to go from one category to the next.
Press VOLUME + or (on the right side of detector) to change your setting within a category.
To complete this change, simply wait a few seconds without pressing a button. The unit will display “Setting Completed”
to confirm your selection. Alternatively, you can get out of the menu by pressing the Right button.