6
Press down slightly and it works
Caution:
• Use only standard wooden pencils (6 - 12mm diameter).
• To protect the machine well, we suggest the user to operate it in this way: working is not
recommended to exceed 3 minutes, then the machine should rest 15 minutes at least.
Otherwise, will damage the cutter or shorten the product life
• If the sharpener slows down significantly or stops while sharpening, try applying less
pressure.
Emptying the Pencil Shaving:
1. Remove the receptacle from the pencil sharpener (this will also disable sharpener).
2. Dispose of the shavings.
3. Slide the shaving receptacle cover back into the sharpener.
To Next Page
