Genie DLS5 - Page 10

10
Remove batteries
Follow these steps to remove the batteries.
1. Remove the battery cover.
Caution! Danger of short circuit.
➔ Remove batteries only with a non-conductive object, e.g., a wooden or
plastic spatula.
2. Remove the batteries.
3. Replace the battery compartment cover.
Part and Key Description
1. Scale Platform
2. Liquid Crystal Display
(LCD) Panel
3. Unit Conversion Key
g/oz/ml/lb,oz/fl,oz
4. On/Tare/Off Key
5. Battery Door and
Compartment
Operation
Activating the Scale
1. Turn the scale on by pressing “TARE/ ON” key
2. The LCD screen will show all characters for a few seconds and then 0g or 0.0oz
will be shown on the display.
3. The scale turns off automatically after being idle for one minute.
Weighing an Item
1. Turn on the scale.
2. Place an item on the platform and the exact weight of item will be displayed.
Selecting Weight Unit
By pressing the "UNIT" key, you can switch between the units grams (g) and ounces
(oz). The selected unit is indicated by a small arrow in the display.
1
2
4
3
5