EasyManua.ls Logo

Genie GCL OPGSX Series User Manual

Genie GCL OPGSX Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
03/2018112606.503918
This Installation Manual provides the information required to install,
troubleshoot and maintain a OPGSX Series Fire Door Operator.
FIRE DOOR OPERATOR
NOT FOR RESIDENTIAL USE
For use on Rolling Steel Fire Doors Only
GCL
PROPER APPLICATIONS:
Door Type(s) Operator Type(s) HP/MAX. Door Weight
Rolling Steel Hoist Model Only 1/2HP = 998lbs.
Fire Door Only FOH mount only 3/4HP = 1220lbs.
1HP = 1440lbs.
Question and Answer IconNeed help?

Do you have a question about the Genie GCL OPGSX Series and is the answer not in the manual?

Genie GCL OPGSX Series Specifications

General IconGeneral
TypeOverhead Garage Door Opener
MotorDC motor
Power Supply120 VAC, 60 Hz
Horsepower1/2 HP
LightingLED Lighting
Battery BackupYes

Summary

Safety Information and Instructions

General Safety Warnings and Hazards

Covers potential hazards, their effects, and prevention measures for safe operation.

Important Door Operation Precautions

Critical safety points to read and follow before operating the door for the first time.

Critical Installation Information

Entrapment Protection Requirements

Mandatory safety devices to prevent entrapment, ensuring safe door operation.

Installation Procedures

Wiring Guidelines

Operator Setup Procedure

Calibration Mode Structure

Detailed menu structure and options available in calibration mode.

Setting Travel Limits

Steps to set the upper and lower travel limits for the door.

FDO Board Configuration

Setting up various parameters for the Fire Door Module (FDM).

Test Procedures

Mechanical Door Drop Test

Critical test verifying mechanical release under normal and loss of power conditions.

Automatic Door Closure Tests

Procedures for testing door behavior with obstructions in three-cycle modes.

Optional Operator Setup

Troubleshooting Guide

Error Code Descriptions

Comprehensive list of error codes and their corrective actions.

Service and Maintenance