EasyManuals Logo

Genie ZX-135/70 with Jib-Extend User Manual

Genie ZX-135/70 with Jib-Extend
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Third Edition • First Printing Operator's Manual
Work Area Safety
Part No. 1272823GT ZX-135/70 15
Observe and use the color-coded direction arrows
on the platform controls and drive chassis for drive
and steer functions.
Do not lower the boom
unless the area below is
clear of personnel and
obstructions.
Limit travel speed
according to the condition
of the ground surface,
congestion, slope,
location of personnel,
and any other factors
which may cause
collision.
Do not operate a boom in the path of any crane
unless the controls of the crane have been locked
out and/or precautions have been taken to prevent
any potential collision.
No stunt driving or horseplay while operating a
machine.
Bodily Injury Hazard
Always operate the machine in a well-ventilated
area to avoid carbon monoxide poisoning.
Do not operate the machine with a hydraulic oil or
air leak. An air leak or hydraulic leak can penetrate
and/or burn skin.
Improper contact with components under any cover
will cause serious injury. Only trained maintenance
personnel should access compartments. Access
by the operator is only advised when performing a
pre-operation inspection. All compartments must
remain closed and secured during operation.
Explosion and Fire Hazards
Do not start the engine if you smell or detect liquid
petroleum gas (LPG), gasoline, diesel fuel or other
explosive substances.
Do not refuel the machine with the engine running.
Refuel the machine and charge the battery only in
an open, well-ventilated area away from sparks,
flames and lighted tobacco.
Do not operate the machine or charge the battery
in hazardous locations or locations where
potentially flammable or explosive gases or
particles may be present.
Do not spray ether into engines equipped with glow
plugs.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genie ZX-135/70 with Jib-Extend and is the answer not in the manual?

Genie ZX-135/70 with Jib-Extend Specifications

General IconGeneral
Turntable Rotation360° continuous
Platform Rotation160°
Gradeability45%
Maximum Platform Height135 ft
Engine Power74 hp
Fuel TypeDiesel
Stowed Height (ft)10 ft
Max Working Height141 ft
Platform Height135 ft
Max Horizontal Reach70 ft
Platform Capacity600 lbs
Machine Width8 ft 2 in
Stowed Height10 ft
Drive Speed - Stowed3.5 km/h
Jib Length12 ft
Horizontal Reach70 ft
Platform Capacity (lbs)600 lbs
Drive Speed3.5 km/h
Stowed Length43 ft 2 in / 13.16 m
Stowed Width8 ft 2 in

Related product manuals