Genius G-Shot D1211 - Setup Menu Operations; Memory Formatting

English
-39
Ú Before formatting the memory card or the internal memory, please ensure that your
files are already backed up.
1. Turn the camera on and ensure that it is in Setup mode.
2. Use the Up shift selector button to select option and use the Down shift selector button
to format.
3. Press Set/ Function button to access the menu, press the Up/ Down shift selector
button to confirm or cancel.
4. Press Set/ Function button to confirm or cancel.
5. Press Mode selector button to exit.
Ú Note: if a memory card is present in the camera, formatting will be carried out on
the memory card and not the internal flash memory.
Auto-power off
This function is seldom used, unless in power-saving mode where the camera will
automatically switch itself off to conserve energy.
1. Turn the camera on and ensure that it is in Setup mode.
2. Use the Up shift selector button to select option and use the Down shift selector
button to select auto-power off.
3. Press Set/ Function button to access the menu, press the Up/ Down shift selector
button to select three minutes, one minute, set to on or off.
4. Press Set/ Function button to confirm.
5. Press Mode selector button to exit.