Need help?Do you have a question about the GENUINE MOTORCYCLES G400C and is the answer not in the manual?
General| Engine Type | Single-cylinder, 4-stroke, air-cooled |
|---|---|
| Displacement | 397cc |
| Bore x Stroke | 85mm x 70mm |
| Compression Ratio | 8.8:1 |
| Transmission | 5-Speed |
| Fuel System | Electronic fuel injection |
| Starter | Electric |
| Front Suspension | Telescopic Fork |
| Front Brake | Single Disc |
| Rear Brake | Drum |
| Rear Tire | 110/90-18 |
| Max Torque | 30 Nm |
| Frame Type | Steel tube |
| Rear Suspension | Dual shock absorbers |
| Length x Width x Height | 2100mm x 800mm x 1100mm |
| Wheelbase | 1410mm |
Advises against operating the motorcycle while under the influence of alcohol or drugs.
Explains the function and proper use of the emergency kill switch.
Explains the operation of the clutch lever and gear shift lever for smooth gear changes.
Outlines the necessary conditions for successfully starting the motorcycle's engine.
Provides step-by-step instructions for starting the motorcycle engine.
Details the critical break-in procedure for new engines to ensure longevity and performance.
Outlines the mandatory first service and inspection after the initial break-in period.
Covers the proper techniques for using both front and rear brakes effectively.
Provides a step-by-step guide for draining and refilling the engine oil.
Details the procedure for checking the engine oil level and adding oil if necessary.
Details the procedure for testing cylinder compression when the engine has starting issues.
Explains the importance of valve clearance and when it needs checking.
Provides detailed steps for measuring valve clearance on a cold engine.
Details the process for adjusting valve clearance to the specified tolerances.
Provides instructions for adding DOT4 brake fluid to the master cylinder.
Explains how to check brake pad wear and when replacement is needed.
Details how to check rear brake shoe wear and when replacement is required.
Details how to inspect the battery, check its voltage, and recharge it if necessary.
Provides guidance on charging the motorcycle battery, especially for extended storage.
Details the components that make up the motorcycle's Engine Management System (EMS).
Identifies the Electronic Control Unit (ECU) as the central processing unit of the EMS.
Shows the location of the Electronic Control Unit (ECU) on the motorcycle.
Outlines essential maintenance procedures and precautions for the EFI system.
To Next Page