Genuine Scooter Company Hooligan 170i User Manual

Explains the meaning of safety symbols like WARNING and CAUTION for user guidance.

Informs about potential exposure to chemicals and health risks from vehicle operation.

Emphasizes using Genuine approved accessories for safe operation and performance.

Advises against unauthorized modifications that could compromise safety or legality.

Details regulations and prohibitions regarding the scooter's noise control system.

Provides instructions on properly loading the scooter and securing cargo.

Warns about the dangers of carbon monoxide gas from exhaust in enclosed areas.

Stresses regular maintenance and pre-ride inspections for safe operation.

Details the process of getting warranty service, including effectiveness and period.

Outlines the steps for warranty claims and items not covered by the warranty.

Lists essential rules and precautions for safe scooter operation.

Specifies the location where the engine number is stamped on the vehicle.

Indicates the location of the Vehicle Identification Number (VIN) inside the rear battery cover.

Describes the positions and functions of the main ignition switch.

Explains the SELECT/ADJUST buttons, EMS light, and oil change light.

Details engine speed, signal, and high beam indicators.

Covers fuel level display, switching between km/h and mph, and ODO/TRIP modes.

Explains how to change units and reset trip meters or oil change lights.

Describes operation of the HI/LO beam, turn signals, and horn.

Explains the engine run/off switch, starter button, and parking switch functions.

Inspects front/rear brakes, levers, and their function.

Covers engine oil, brake fluid, tire condition, and cable operation.

Checks stands, assembly, fuel level, and operation of lamps/lights.

How to inspect and adjust the free play of front and rear brake levers.

Instructions for checking brake fluid level and inspecting for leaks.

Guidance on checking the wear of disc brake pads.

Details on checking tire pressure and inspecting for wear and damage.

How to inspect tire tread depth and when to replace tires.

How to check the throttle grip's clearance and return action.

Ensures all lights, signals, and switches are functioning correctly.

Guidelines for fueling, including unleaded gas and avoiding overfilling.

Step-by-step instructions for starting the scooter's engine.

How to visually check and measure brake pad thickness for wear.

Procedures for checking brake fluid level, using correct oil, and refilling.

Summarizes the vehicle's limited warranty and EPA emissions warranty coverage.

Instructions on how to report safety defects to the National Highway Traffic Safety Administration (NHTSA).