· When ever possible, avoid exposure to extreme
weather conditions such as direct intense sunlight, or
sub-zero temperatures.
· Use a stiff bristle brush to remove dirt and dust from
carpeting.
· Only use a mild cleaners with a citrus or water base
to remove stains.
Always test an inconspicuous area for
discoloration first.
· Never use solvents or lacquer base cleaners.
· Never expose any of the speaker components to di-
rect rain or liquids. If this occurs stop using the
equipment immediately and contact a qualified repair
consultant.
CARE & MAINTENANCE
WARNING:
Genz Benz enclosures are not designed to be suspended or
hung from any surface of the cabinet. This can only be
achieved with properly installed professional “flying hardware”
and installed by qualified rigging technician.
SET UP TIPS
· Always survey the area you wish to cover with your
speaker system to make sure that your system is
adequately matched for the venue.
· Use good judgment when placing your speakers for
audience coverage so that the speaker system will
disperse over your audience and not directly at ear
level. (
Remember, high frequencies are absorbed much
easier by people, curtains and other soft materials; while
low frequencies are not so easily absorbed)
· Always use good quality speaker cables and never
use guitar cables for hooking-up your speaker sys-
tem.
· Important: Always use caution when connect-
ing speakers to an amplifier source. The power
amp should be off when making connections.
· Severe hearing loss is possible if subjected to
extended durations of high-output sound levels.
· Always wear hearing protection whenever pos-
sible.
TRITON
ARRAY CLASS EX
OWNER’S MANUAL
FEATURES:
· Quality hand-built craftsmanship.
· Computer designed venting for precision per-
formance and durability
· Attractive and durable premium carpet.
· Black 16 gauge heavy duty perforated speaker
grills.
· Classic designs and appearance
· High quality speaker, tweeter and crossover
components.
· LTP—luminous tweeter protection, is designed
into all crossover to absorb excessive high fre-
quency voltage.
Proudly manufactured in the U.S.A.
To Next Page
Need help?
General