9/56
5.2 Area of responsibility of other
manufacturers of accessories
Î Other manufacturers of accessories for geo-
Fennel EcoDist Plus are responsible for the
development, the realization and the
communication of safety concepts for their
products and their effects in combination
with the geo-Fennel product.
5.3 Area of responsibility of the
operator
The operator is obliged to observe the following:
Î He understands the protection information
on the device and the operatinginstruction.
Î He is familiar with the customary in-house
accident control directives.
6 Overview
6.1 Keys
See drawing A:
1. laser emitter
2. receiver lens
3. display
4. on/measure
5. Subtraction
6. measuring plane/unit
7. clear/off
8. area/space volume/Pythagoras
9. Addition
6.2 display
See drawing D:
10. measuring plane
11. area/space volume/Pythagoras
12. battery symbol
13. 2. row
14. fractions/exponents
15. units
16. summary row
17. Addition/Subtraction
7 Inbetriebnahme
Insert the batteries
See drawing E:
 To ensure a reliable use, use exclusively
alkaline batteries.
 Remove battery compartment cover.
 Insert alkaline batteries (2 x AAA) observing
the polarity.
 Close the battery compartment cover.
Changing the batteries
 Change the batteries when the battery
symbol is blinking permanently.
8 How to use
8.1 Measuring conditions
The quality of the measurement depends on the
surfaces to which you are measuring.
Measurement errors
Measuring errors are possible in case of:
Î colourless fluids (e.g. water)
Î clean, translucent glass
Î styrofoam or similar semi-translucent
surfaces
Î strongly reflecting targets that deflect the
laserbeam
Î measurements aimed at moving objects
Causes:
Î Strongly reflecting targets deflect the laser
beam and cause measuring errors.
Î Non-reflecting, dark surfaces increase the
measuring time.
For constantly high-quality
measurements
 Perform control measurements periodically.
 Perform control measurements before and
after important measurements.
To Next Page
Loading...
