geo-FENNEL FMR 800-M/C - Supplied With; Machine Control Receiver FMR 800-M;C-SET; Machine Control Receiver FMR 800-M;C; Remote Display FRD 807

21
EN
Technical Specifications
FMR 800-M/C
Beam reception angle 360 °
Detectable laser speeds 300 – 1200 rpm
Accuracy
Bulldozer - mode
· Blade tilt; fine / standard / coarse ±0,5 ° / ±1,5 ° / ±2,5 °
· Height indication; fine / standard / coarse ±5 mm / ±15 mm / ±30 mm
Excavator - mode
· Bucket tilt; fine / standard / coarse ±0,5 ° / ±1,5 ° / ±2,5 °
· Height indication; fine / standard / coarse ±5 mm / ±15 mm / ±30 mm
Power supply NiMH 3500 mAh
Working range with a class 2 rotating laser 250 m
Working range with a class 3R rotating laser 350 m
Battery charging time 4 - 5h
Automatic power off 60 min.
Dust / water protection IP 66
Temperature range -10°C - +50°C
Remote display FRD 807
Wireless (RF) communication range 10 m
Communication channels 3
Power supply 4x AA Alkaline batteries
Machine control receiver FMR 800-M/C-SET, Art.Nr. 264550
built-in rechargeable battery, charger, remote display FRD 807 with suction pad and batteries, hard
carrying case
Machine control receiver FMR 800-M/C, Art.Nr. 264500
built-in rechargeable battery, charger, hard carrying case
Remote display FRD 807, Art.Nr. 264540
with adjustable suction pad mount and batteries
A
SUPPLIED WITH