24
EN
C
POWER SUPPLY FMR 800-M/C
The Machine control receiver FMR 800-M/C is powered by an internal NiMH rechargeable battery.
Charging the NiMH Rechargeable battery:
Connect the battery charger to a suitable AC outlet and the charging socket on the receiver.
The battery charger LED displays the charging status:
Permanent red light indicates that the battery is charging.
Permanent green light indicates that the charging process is completed.
The maximum operating time with a fully charged battery is between 40-45 hours.
The charging time is between 4-5 hours.
Battery status indicator:
The rechargeable battery status is displayed when you power on the device
80–100%
Full power
30–79%
Power
5–29%
Very low power, re-
charge NiMH battery
pack
To Next Page
Loading...
