Need help?Do you have a question about the Geo Knight Digital Knight K20S and is the answer not in the manual?
General| Model | K20S |
|---|---|
| Category | Industrial Equipment |
| Manufacturer | Geo Knight |
| Type | Heat Press |
| Platen Size | 16" x 20" |
| Time Range | 0-999 Seconds |
| Control Type | Digital |
| Warranty | 1 year |
Explains how to adjust the timer settings for the heat press operation.
How to switch temperature display between Fahrenheit and Celsius units.
How to change timer display from minutes:seconds to hours:minutes format.
Explains how the control records pressing cycles and how to reset the count.
Defines the highest pressure/height point for calibration of the gauge.
Defines the lowest pressure/height point for calibration of the gauge.
Addresses issues where the timer fails to start or reset correctly.
Explains causes for 'Err' messages and potential temperature sensor issues.
Troubleshoots lack of response or sound from the keypad and controller connection.
Addresses binding or difficult operation of the clamp mechanism and linkage pins.
Guides on troubleshooting power issues when the press fails to turn on.
Provides solutions for removing burned transfer material from the heat platen surface.
To Next Page