Geo Tracker 1994 - Page 146

4. Then fill the coolant recovery tank to
the
"FULL" murk.
Put the cap back
on the coolant
recovery tank,
but leave the radiator
pressure cap
off.
6.
0
Start the engine and let it run until
you can feel the upper radiator hose
getting hot. Watch out for the engine
fan.
By this time, the coolant level inside
the radiator filler neck may be lower.
If the level is lower, add more of the
proper
mix through the filler neck
until the level reaches the base of the
filler neck.
145 ...