Seats and Restraint Systems
4.
Unlock
the
bottom part
of
the seat.
On the one-piece rear seat, pull ou
On the split rear sear, lift the
the release ring.
release lever on either seat.
5.
Lift the bottom of
the
seat up and pus1
it
toward the front of the vehicle.
i.
Find the support bar
on
the bottom
of
the seat. This bar keeps the rear seat
from unfolding.
’.
Pull the inner end
of
the
support off of
the
seat
bracket
and
swing
it
down.
’.
Push the support bar into the floor
bracket.
Be
sure the support bar
is
secured.
‘0
unfold
the
seat:
ieep your hands, safety
belts
and
other
bjects away from where the seat
will
:st.
Pull
the
support bar out of the floor
bracket and swing
it
up and toward
the
bottom
of
the seat.
Push
the support bar into
the
bracket
on the bottom
of
the seat.
Slowly pull the seat down to
the
floor.
The seat should latch into place. Pull
up
on
the bottom of
the
seat
to
be sure
it
is
locked
in
position.
Pull the seatback
up
and push
it
back.
Push and pull the
top
of the seatback
to
be
sure
it
is locked
in
place.
. .
.I4
To Next Page
Loading...
