Geo Tracker 1994 - Page 21

Seats and Restraint Systems
First, you’ll want to know which restraint
systems
your vehicle has.
We’ll start with the driver position.
Driver Position
This section describes the driver’s
restraint system.
Lap-Shoulder Belt
The driver has a lap-shouldcr bclt. Here‘s
how 10 wear il properly.
1. Close and lock the door.
2. Adjust the seat (to see how, see
“Seats”
in the Index) so you can sit up
straight.
3. Pick up the latch plate and pull the
belt across you. Don’t
let it get
twisted.
4. Push the latch plate into the buckle
until it clicks.
Pull up
on the latch plate to make sure
it is secure. If the belt isn’t long
enough, see “Safety Belt Extender” at
the end of
this section.
Make sure the release button on the
buckle is positioned
so you would be
able
to unbuckle the safety belt
quickly
if you ever had to.
... 20