Features and Controls
Parking
Parking Brake
To
set the parking brake:
Hold the brake
pedal down and pull up
on
the parking
brake lever. If the ignition is
on,
the brake
system warning light will come
on.
To
release the parking brake:
Hold the
brake pedal down. Pull the parking brake
lever up until you can push in the release
button. Hold the release button in
as
you
move the lever all the way down.
NOTICE:
Driving with the parking brake
on
can cause your rear brakes to over-
heat.
You
may have
to
replace them,
and you could also damage other
parts
of
your vehicle.
If
you
are towing a trailer, see“Towing a
Trailer”
in
the Index.
Shifting into “P” (Park)
(AUTOMATIC TRANSMlSSlON)
...
48
To Next Page
Loading...
