Features and Controls
For a single wiping cycle, push the lever
to “MIST.” Hold it there until the wipers
start, hen let
go.
The wipers will stop
after one cycle. If you want more cycles,
hold the lever
on
“MIST.” longer.
Washers
Pull the wiper/washer lever toward you to
spray washer fluid’on
the
windshield. The
spray will continue
until
you release the
lever. This will also turn on the low speed
wipers.
Heavy snow or ice can overload your
wipers.
A
circuit breaker will stop them
until the motor cools. Clear away snow or
ice to prevent an overload.
NOTICE:
0
0
0
0
When using concentrated washer
fluid, follow the manufacturer’s
instructions for adding water.
Don’t
mjx
water with
ready-to-use washer fluid. Water
can cause the solution
to
freeze
and damqge your washer fluid
tank and other parts of the
washer system. Also, water
doesn’t clean as well as washer
fluid.
Fill your washer fluid
tank
only
3/4
full when it’s very cold. This
allows
for
expansion, which
could damage the tank
if
it is
compldtel) full.
Don’t use radiator antifreeze in
your wipdshield washer. It can
damage your paint.
...
58
To Next Page
Loading...
