GEONAUTE G-EYE Quick Start Guide

2 h
12
6
39
WIFI indicator
Scroll / Stop video button
Validation button / Take photos
ON / recharging indicator
ON/OFF button
Start video
REMOTE CONTROL DESCRIPTION
CHARGING THE BATTERY
PAIRING PROCEDURE
 Your WiFi remote control is splash proof (do not submerge) and can control up to 3 cameras at the same
time.
 The remote control is compatible with GEONAUTE cameras: G-EYE 300, G-EYE 500 and G-EYE 700.
The battery life of the remote control is 4 hours maximum.
Charging the battery takes around 2 hours.
A. The WiFi on your GEONAUTE camera must be set to STA (see the user manual for your camera: support.
geonaute.com) and activated.
B. Switch on your remote control by holding down the button
C. Wait between 20 and 30 seconds
D. Select the number of cameras you want to control:
Scroll down through the menu
Scroll up through the menu
Conrm your choice
E. Control the camera
100-0088
2H30
1080P- 50
EN
G-EYE Watch Remote
1/3

GEONAUTE G-EYE Specifications

General

Brand	GEONAUTE
Model	G-EYE
Category	Remote Control
Language	English