33
English
To carry out the calibration, press GOTO to display the menu
bar and then, by the joystick, select SETUP, CALIBRATION
and then ON. A message will prompt the user to move the
cursor to the boat’s true position, appropriately enlarged by
the ZOOM+ key.
Press ENTER to move the boat’s position to the point indicated
by the cursor. This operation will save the calibration for use
in future calculations.
NOTE: When the calibration is activated, the coordinates will be marked by (*).
To cancel the calibration, press GOTO to display the menu bar,
select SETUP, CALIBRATION and then OFF.
Local time
By this function the user can enter local time instead of the
Greenwich time (GMT) supplied by the GPS receiver.
To enter local time, press GOTO to display the menu bar, select
SETUP, SET TIME and then LOCAL.
A window will allow entering local time by using the joystick.
Press ENTER to confirm the operation.
To cancel local time, press GOTO to display the menu bar, se-
lect SETUP, SET TIME and then GMT.
Chart presentation
This function allows the user to select the symbols and colors
of chart presentation between International mode and US mode.
To change the chart presentation mode, press GOTO to display
the menu, select SETUP, PRESENTATION and then choose
the option desired.
Display mode
The chart color can be selected among three predefined modes:
BRIGHT (bright light), DAY (normal light) and NIGHT (poor
light).
Press GOTO to display the menu, select SETUP, MODE and
then choose the option desired.
To Next Page
Loading...
