57
English
Use the joystick to switch to the next page showing the geo-
graphical coordinates of each waypoint:
WP NO.: Waypoint ID
POSITION: Waypoint latitude and longitude
Use the joystick to go back to the previous page or press the
PAGE/EXIT key to exit.
To access the waypoint data, move the manual cursor on the
waypoint of interest, press the GOTO key and select the INFO
option.
Entering speed and fuel consumption data
The data are used to calculate the values displayed in the
ROUTE window.
Press the GOTO key to display the menu, select ROUTE, CUR-
RENT, SET SPEED and press ENTER to access the windows
for data insertion. Use the joystick to enter the data required
and to confirm the operation.
Storing a route in the SD Card
Press the GOTO key to display the menu, select ROUTE, CUR-
RENT, SAVE and press ENTER. Use the joystick to change the
default name and press ENTER to confirm the operation.
A message will confirm that the route has been stored cor-
rectly. Once stored, the route will disappear from the screen.
Recalling a route from the SD Card
Press the GOTO key to display the menu, select ROUTE, OLD
and press ENTER to open the route catalog; select the route by
the joystick and then press ENTER to confirm, or PAGE/EXIT to
exit.
The route recalled will be displayed, the Autozoom function
automatically enabled and a window will allow selecting the
target waypoint.
To Next Page
Loading...
