Geonav 3 - GOTO PORT

65
English
GOTO PORT
Press the GOTO key and select
PORT by the joystick.
The list will display the latest
ten ports previously selected.
Choose the desired port by the
joystick, or select New to display
the whole list of the ports stored
in the cartridge.
By moving the joystick in the
four directions, form the port
name, or part of it; when the
desired port is shown, highlight
it by the joystick and confirm its
selection by pressing ENTER.
Once the desired port has been
selected, the GEONAV will in-
sert a waypoint in the port posi-
tion and append the new leg to
the existing route (if no route is
available, the new waypoint will
be connected to the boat’s posi-
tion).
Press the PAGE/EXIT key to go back
to Navigation mode and enable
automatically the Autozoom func-
tion.
Goto Port