79
English
FUNCTIONAL CHARACTERISTICS
This chapter describes some of the most important functions
of the GEONAV, as well as the terms most commonly used in
this document.
Switching on/Switching off the unit
Press and hold pressed the PWR key until the unit switches
on. To switch the GEONAV off, keep the PWR key pressed for
more than 1 second.
Selecting the marine or land mode
At start-up, the mode enabled is that active when switching
the unit off. To switch from marine navigation to land naviga-
tion, make sure that the cartridge storing the desired data
(marine or land) has been loaded, then select SETUP, CAR
NAVIGATOR or MARINE NAVIGATOR.
The Car Navigator mode features two options: Car and Walk.
In Walk mode the route is calculated without taking into ac-
count driving restrictions such as one-way roads or pedes-
trian malls.
NOTE: If the cartridge currently inserted contains no road maps, as soon as the CAR
NAVIGATOR option is selected, the unit will automatically turn off after showing a
warning message. At the following power on, the unit will start in marine navigation
mode.
Voice instructions
As mentioned in the introductory chapter, in compliance with
safety regulations, the car navigator helps the user to follow
the route defined thanks to voice instructions. The power
cord includes a speaker with adjustable volume.
The instructions and information provided by the speaker
concern:
• Entrance/exit ramps of highways, bridges, forks, traffic
circles and services.
Functional Characteristics
To Next Page
Loading...
