Chapter Four Maintaining Methods
Because of running, friction and load change, inevitably produce connection bolt looseness,
parts damage phenomenon, which make the system's correct state destroyed, the engine’s
power decline, fuel consumption increase, increases the normal use of power tiller. In order to
reduce the occurrence of the above situation, we must strictly, regularly do the maintenance work
well. To keep the micro tillage machine in good technical shape and prolong its service life.
1、Running-in
1. the running of diesel engine pls consult it’s user manual.
2. new power tiller or repaired power tiller, should work for 1 hour in zero load condition. After
5 hours light load working, run out the whole lubricating oil of the transmission and crankcase of
diesel engine at once while the temperature is hot, and then conduct 4 hours running-in as per the
fourth demands.
2、The technical maintenance
1. Per shift maintenance (before running and after running every time)
To Next Page
Loading...