Geotech PGT 900 - Chapter Six Common Faults And Methods; Clutch Faults and Methods

23
Chapter Six Common Faults And Methods
1、Clutch’s faults and methods
Phenomenon
Reasons
Methods
Clutch failure
Failure of clutch handle bar
Fix or replace
Failure of clutch cables
Change
Shifting fork not on the position
Readjustment or replace
Drop of shift shaft, arm set
Fix or replace
Break of shift fork
Replace
spring failure
Replace
Slip( loose the clutch
handle bar, the engine
works well, but the
transmission slow-turning
or stop working)
spring fatigue failure
Replace
Shift shaft turning ineffective, which
make the shifting fork not on the right
place
Clean the surface of
locating shaft and shuffle
disc
Clutch cable misadjustment
Readjust the clutch cable