GeoVision GV-FD120D Quick Start Guide

88
8.4 Connecting the Camera
1
2
1. Use a standard network cable to connect the camera to your network.
2. Connect power using one of the following methods:
• Plug the supplied power adapter to the power port.
• Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable.
3. When the ready LED of the camera shines green, the camera is ready.
Note: PoE function is only supported for GV-CA120 and GV-CA220.

GeoVision GV-FD120D Specifications

General

Brand	GeoVision
Model	GV-FD120D
Category	Security Camera
Language	English