Gerber EDGE FX Installation Guide

8
CHAPTER 2
Unpacking the GERBER EDGE FX
7 Open the printer cover and remove the three foam blocks and foam and cardboard
assembly that cushions the print head during shipping. Save all foam blocks and the
cardboard assembly with the original packaging.
8 Store all packaging materials and the empty accessories box in the original shipping
carton and save for future use.
Cardboard and foam
protective packaging
Foam cushions
Foam cushions

Gerber EDGE FX Specifications

General

Print Technology	Thermal transfer
Resolution	300 dpi
Connectivity	Parallel
Media Types	Vinyl, Reflective
Max Media Width	15 in (381 mm)
Max Print Width	11.8 in (300 mm)