652
Chapter 58:
Advanced Setup Options
Optimizing the print registration of black
If color-to-color print registration is critical, you can optimize the print registration of black in a
job with the CMYK Black check box in the GSPPlot Print Options dialog box. For example, if the
job has spot colors with black butting against other colors, occasionally there may be a small
seam of unprinted vinyl, which allows the vinyl color to show through. If you change the spot
colors to process colors and turn on registration problems are reduced.
To optimize the print registration of black
1 Turn on Print as Process in the Print Options dialog box to convert the job to a process
color job.
2 Turn on CMYK Black. Black colors in the job are printed with all four process colors.
Tip: When you use this printing option, you will use slightly more process foil and the edge of
the black shape may not be quite as sharp as spot color – however color-to-color registration
is improved.
To Next Page
Loading...
Need help?
General
