German pool PRO-6S - Speed Settings and Operating Modes; Preset Program Descriptions

Operating Instructions
P.8
Preset Programs
Icon Program Descriptions LCD Display
Vegetable
Speed H for 30 sec and pause for 2 sec;
then speed 6 for 10 sec and pause for 2 sec;
then speed H for 60 sec and pause for 2 sec;
nally speed 6 for 10 sec.
Soy Milk
Accelerating from speed 1 to speed 5 in 5 sec,
running at speed 5 for 25 sec; then speed 8 for 30
sec; nally speed H until nish. Total time is 6 min.
Sauce
Speed 8 for 2 sec and pause for 1 sec. Repeat for 5
cycles (“Flash”). Then speed H for 45 sec (“Auto”).
Total time is 1 min.
Smoothie “High” mode for 30 sec.
Bisque
Flash Mode for 10 sec., Speed 7 for 30 sec. “Auto”
mode for 8 min.
Nuts
Speed 5 for 5 sec. Then Speed 8 for 2 sec and
pause for 1 sec. Repeat this process (“Flash”) for
10 cycles. Total time is 35 seconds.
/ Time Display / Speed Display
/ Time Display / high
/ Speed Display
/ Time Display / Flash
/ Speed Display
/ Time Display / Flash / Auto
/ Speed Display
/ Time Display / high
/ Speed Display
/ Time Display / Auto
/ Speed Display
Operating Modes
- Automatic Speed-Up Mode
The motor speed increases gradually from setting 1 to setting 7 in the rst 5 to 10 seconds. Then it speeds up to
setting H within the next 5 seconds, and remains at this speed.
- High Speed Mode
This setting is the combination of high speed and pulse operation: Speed H for 8 sec and pause for 2 sec. With
this pattern, the food clung on the wall of the blender jar can be washed back to the mixture.
- Pulse Mode (momentary)
When button is being pressed and held down, the motor operates at speed H. Motor will stop once the
button is released.
Auto
Pulse
High
Pulse
Speed Setting
The speed 1 to H (the highest speed) can be set by pressing the Speed Setting (“+” & “-”) buttons. The display
shows 1, 2, 3, 4, 5, 6, 7, 8, 9, H. Keep pressing the Speed Setting buttons to speed up the speed-setting pace. The
speed can also be adjusted anytime during operation.
Speed-
Speed+