GET BOOST - Page 2

2
A. WARNINGS FOR PROPER USE
Please carefully read all instructions and warnings before using the GET
Boost Kit. Failure to read and/or follow the instructions and warnings may
result in improper use or malfunction of the device, potentially causing
product damage and personal injury.
THE GET BOOST KIT IS INTENDED FOR RACING USE ONLY.
GENERAL WARNINGS
1. Follow the instructions described in this manual to avoid damage to the
vehicle.
2. Do not modify or replace any materials provided by GET.
3. Always ensure that no installed parts interfere with hot engine
components, steering components, or the rider.
4. This product is not a toy. Keep it out of reach of children and pets as it
contains small components that could be swallowed.
5. Do not use the product for purposes other than those specified in these
instructions.
6. Do not use pressure washers on the product.
SPECIFIC WARNINGS
1. Always ensure that the GET Boost Kit is properly installed and
functioning before using the motorcycle.
2. Never expose the device to temperatures above 70°C/158°F.
3. Install it when the engine is cold.
4. If the motorcycle does not start or the engine runs irregularly, verify that
the motorcycle on which GET Boost is applied matches the make, model, and
year specified by Athena in the list of compatible applications.
5. The GET Boost Kit included in this package works only on motorcycles
with an original electrical system.
The GET Boost Kit enhances motorcycle performance once the new
Athena Big Bore Cylinder Kit is installed.
EN
ENGLISH
WARNING: Installing GET Boost without the correct Athena Big
Bore Cylinder Kit may lead to anomalies or malfunctions of the
motorcycle, potentially causing damage and personal injury.